Features
Skirts We fixed the issue where 34mm Z motors didnt fit in the machine with the bottom panel installed, this involved increasing the height of the skirts/feet by 2mm We added a simple filament runout sensor to the rear right foot Toolhead Mini Stealthburner direct drive and bowden cowling part cooling ducts improved an issue with the guidler being able to pivot in an undesired direction was addressed by tightening the bolt holes to reduce play RIDGA support for the bearings that come stock with the ridga kit has been added Tophat cam locks for the tophat were changed to a simple hex key design Z Endstop z endstop mount was beefed up to improve ridgidity BOM Changes the BOM increased by the following items 2x m2x10 self tapping screw 1x MR85 bearing 1x Microswitch 1x ECAS04 Bowden Collet